SyncLink GTs RS-422/RS-485 Speed-Enhanced adapters are synchronous, full-duplex serial communications adapters available in the following models:

• Single port GTs Universal-voltage PCI bus master adapter supporting speeds up to 20Mbps.
• Multiport GT2s PCI Universal-votage PCI bus master adapter supporting two simultaneous 20Mbps connections.
• Single port GTs PC/104+ bus master adapter, speeds up to 20Mbps.

SyncLink GTs adapters are also available in Extended Temperature models.

SyncLink adapters cable directly to data communications equipment such as high-speed synchronous modems and digital service CSU/DSUs, as well as, satellite and RF modems through their serial interface ports. For DCE initialization and connection setup, SyncLink models support an asynchronous mode for sending "AT" commands the DCE.

An optional header provides general purpose digital (TTL) input/output signals for the SyncLink GTs family of serial adapters. These signals can be configured (direction), controlled, and monitored through the serial API. Contact our sales department for ordering details.

SyncLink adapters feature Plug and Play configuration of adapter resources, such as I/O base address and interrupt request level. The number of adapters that can be installed is limited only by the number of PCI, PC/104+, and PC Card slots

Incoporating the PCI bus within the industry proven PC/104 form-factor brings many advantages to users, including fast data transferover a PCI bus, unique self-stacking bus, and high reliability. The SyncLink GTs PC/104+ adapter further enhances the rugged design by supporting extended temperature ranges (-40 - 85 degrees C) as a standard feature.

SPECIFICATIONS  (SyncLink GTs Speed-Enhanced)

Controller: MicroGate FPGA
Serial Ports: One
Serial Interface: RS-422/485 (RS-530 & RS-449, X.21)
Serial Format: SDLC, HDLC, raw bit synchronous, BISYNC, MONOSYNC, asynchronous
Data Rates: Up to 20 Mbps synchronous; 921600 bps asynchronous
Clocking: internal, external, DPLL
Plug and Play configurable, Bus Master DMA data transfer
Environmental: Temperature 0C to 60C standard, -40C to +85C optional; humidity 0 to 95% non-condensing;  alt. - 200 to +10,000 ft
Mechanical: Low-Profile PCI MD1; length 4.7 ", height 2.5 ", Weight 2.7 Oz
PCI 3.0 compliant, 32-bit, 33mhz (5v, 3.3v and PCI-X compatible), Low-profile compatible w/optional bracket.
Power usage:  0.2A +5V, 23 mA +12V, 23mA -12V
Regulatory: FCC Class B, CE, ANSI C63.4 Class B, VCCI Class B, EN55022 Class B, EN55024, RoHS
Connector: DB-25 (male)
Cable Options: DB-25 (female) to DB-25 (male); DB-25 (female) to 34-pin V.35 (male); DB-25 (female) to 37-pin RS-449 (male); DB-25 (female) to 15-pin X.21 (male)

SPECIFICATIONS (SyncLink GT2s Speed-Enhanced)

Controller(s): MicroGate FPGA
Serial Ports: Two (2)
Serial Interface: RS-422/485 (RS-530,RS-449, X.21)
Serial Format: SDLC, HDLC, raw bit synchronous, BISYNC, MONOSYNC, asynchronous
Data Rates: Up to 20 Mbps per port synchronous; 921600 bps asynchronous
Clocking: internal, external, DPLL
Plug and Play configurable, Bus Master DMA data transfer
Environmental: Temperature 0C to 60C standard, -40C to +85C optional; humidity 0 to 95% non- condensing; alt. - 200 to +10,000 ft.,
Mechanical: Standard PCI short card; length 6.875", height 4.2",  Weight 5.5 Oz
PCI 3.0 compliant, 32-bit, 33mhz (5v, 3.3v, and PCI-X compatible)
Power usage: 300mA 5V, 80mA +12V, 80mA -12V
Regulatory: FCC Class B, CE, ANSI C63.4 Class B, VCCI Class B, EN55022 Class B, EN55024, RoHS
Connectors: LFH-60
Supplied Adapter Cable: LFH-60 to dual DB-25 (male)
Cable Options: DB-25 (female) to DB-25 (male); DB-25 (female) to  34-pin V.35 (male); DB-25 (female) to 37-pin RS-449 (male); DB-25   (female) to 15-pin X.21 (male)

SPECIFICATIONS (SyncLink GTs PC/104+ Speed-Enhanced)               

Controller: MicroGate FPGA
Serial Ports: One
Serial Interface: RS-422/485 (RS-530 & RS-449, X.21)
Serial Format: SDLC, HDLC, raw bit synchronous, BISYNC, MONOSYNC, asynchronous
Data Rates: Up to 20 Mbps synchronous; 921600 bps asynchronous
Clocking: internal, external, DPLL
Plug and Play configurable, Bus Master DMA data transfer
Rotary switch selects 1 of 4 PC/104+ stack positions
Environmental: Temperature -40C to +85C; humidity 0 to 95% non-condensing; alt. - 200 to +10,000 ft;
Mechanical: Standard PC/104+ dimensions, Stack-through connectors, Weight 3.1 Oz
PCI 3.0 compliant, 32-bit, 33mhz (Universal, 3.3v and 5v)
Power: 200mA +5V, 100mA 3.3V
Connector: 26 Pin Header with Ejector/Latches, 26-pin Header to DB-25 adapter cable
Cable Options: DB-25 (female) to DB-25 (male); DB-25 (female) to 34-pin V.35 (male); DB-25 (female)
to 37-pin RS-449 (male); DB-25 (female) to 15-pin X.21 (male)